amplifiers - smt 5 5 - 204 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com HMC441LH5 gaas phemt mmic medium power amplifier, 7.0 - 15.5 ghz v00.0705 general description features functional diagram the HMC441LH5 is a broadband 7 to 15.5 ghz gaas phemt mmic medium power ampli er housed in a hermetic smt leadless package. the ampli er provides 15 db of gain and 21.5 dbm of saturated power at 25% pae from a +5.0v supply. this 50 ohm matched ampli er does not require any external components, and the rf i/os are dc blocked, making it an ideal linear gain block or driver ampli er. the HMC441LH5 allows the use of surface mount manufacturing techniques and is suitable for high reliability military, industrial & space applications. gain: 15 db saturated power: +21.5 dbm @ 25% pae single positive supply: +5.0 v 50 ohms matched input/output hermetic smt package, 25mm 2 screening to mil-prf-38535 (class b or s) available electrical specifications, t a = +25 c, vdd = 5v typical applications parameter min. typ. max. min. typ. max. min. typ. max. min. typ. max. units frequency range 7.0 - 8.0 8.0 - 13.0 13.0 - 14.0 14.0 - 15.5 ghz gain 11 14 13 16 12 15 10.5 13.5 db gain variation over temperature 0.015 0.02 0.015 0.02 0.015 0.02 0.015 0.02 db/ c input return loss 11 13 10 8 db output return loss 10 15 14 12 db output power for 1 db compression (p1db) 15.5 18.5 17 20 16 19 16 19 dbm saturated output power (psat) 20 21 21.5 21 dbm output third order intercept (ip3) 30 32 32 32 dbm noise figure 5.0 4.75 4.75 5.0 db supply current (idd) 90 90 90 90 ma the HMC441LH5 is a medium pa for: ? telecom infrastructure ? military radio, radar & ecm ? space systems ? test instrumentation
amplifiers - smt 5 5 - 205 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com input return loss vs. temperature output return loss vs. temperature broadband gain & return loss gain vs. temperature p1db vs. temperature psat vs. temperature -20 -15 -10 -5 0 5 10 15 20 4 6 8 10 12 14 16 18 20 s21 s11 s22 response (db) frequency (ghz) HMC441LH5 gaas phemt mmic medium power amplifier, 7.0 - 15.5 ghz v00.0705 13 14 15 16 17 18 19 20 21 22 23 6 8 10 12 14 16 18 +25c +85c -40c psat (dbm) frequency (ghz) 13 14 15 16 17 18 19 20 21 22 23 6 8 10 12 14 16 18 +25c +85c -40c p1db (dbm) frequency (ghz) -20 -15 -10 -5 0 6 8 10 12 14 16 18 +25c +85c -40c return loss (db) frequency (ghz) -20 -15 -10 -5 0 6 8 10 12 14 16 18 +25c +85c -40c return loss (db) frequency (ghz) 0 2 4 6 8 10 12 14 16 18 20 6 8 10 12 14 16 18 +25c +85c -40c gain (db) frequency (ghz)
amplifiers - smt 5 5 - 206 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com power compression @ 12 ghz output ip3 vs. temperature noise figure vs. temperature gain, power & oip3 vs. supply voltage @ 12 ghz reverse isolation vs. temperature HMC441LH5 gaas phemt mmic medium power amplifier, 7.0 - 15.5 ghz v00.0705 0 1 2 3 4 5 6 7 8 9 10 6 8 10 12 14 16 18 +25c +85c -40c noise figure (db) frequency (ghz) -50 -40 -30 -20 -10 0 6 8 10 12 14 16 18 +25c +85c -40c isolation (db) frequency (ghz) 14 16 18 20 22 24 26 28 30 32 34 36 4.5 4.6 4.7 4.8 4.9 5 5.1 5.2 5.3 5.4 5.5 gain p1db psat oip3 gain (db), p1db (dbm), psat (dbm), oip3 (dbm) vdd supply voltage (vdc) 16 18 20 22 24 26 28 30 32 34 36 6 8 10 12 14 16 18 +25c +85c -40c oip3 (dbm) frequency (ghz) 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 -10 -8 -6 -4 -2 0 2 4 6 8 10 pout gain pae pout (dbm), gain (db), pae(%) input power (dbm)
amplifiers - smt 5 5 - 207 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com outline drawing absolute maximum ratings drain bias voltage (vdd) +6.0 vdc rf input power (rfin)(vdd = +5.0 vdc) +15 dbm channel temperature 175 c continuous pdiss (t = 85 c) (derate 6.9 mw/c above 85 c) 0.62 w thermal resistance (channel to ground paddle) 145 c/w storage temperature -65 to +150 c operating temperature -40 to +85 c vdd (v) idd (ma) +5.5 92 +5.0 90 +4.5 88 note: ampli er will operate over full voltage range shown above typical supply current vs. vdd notes: 1. package body material: ceramic & kovar 2. lead and ground paddle plating: gold 40 - 80 microinches. 3. dimensions are in inches [millimeters]. 4. lead spacing tolerance is non-cumulative 5. pad burr length 0.15mm max. pad burr height 0.25mm max. 6. all ground leads and ground paddle must be soldered to pcb rf ground. HMC441LH5 gaas phemt mmic medium power amplifier, 7.0 - 15.5 ghz v00.0705 electrostatic sensitive device observe handling precautions
amplifiers - smt 5 5 - 208 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com pin descriptions pin number function description interface schematic 1, 3-7, 9, 10, 12 gnd these pins and package bottom must be connected to rf/dc ground. 2rfin this pin is ac coupled and matched to 50 ohms from 7.0 - 15.5 ghz. 8rfout this pin is ac coupled and matched to 50 ohms from 7.0 - 15.5 ghz. 11 vd d power supply voltage for the ampli er. external bypass capacitors are recommended. HMC441LH5 gaas phemt mmic medium power amplifier, 7.0 - 15.5 ghz v00.0705 application circuit component value c1 100 pf c2 1,000 pf c3 4.7 f
amplifiers - smt 5 5 - 209 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com evaluation pcb HMC441LH5 gaas phemt mmic medium power amplifier, 7.0 - 15.5 ghz v00.0705 the circuit board used in the nal application should use rf circuit design te chniques. signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be con- nected directly to the ground plane similar to that shown. a suf cient number of via holes should be used to connect the top and bottom ground planes. the evaluation circuit board shown is available from hittite upon request. list of materials for evaluation pcb 111560 [1] item description j1 - j2 pcb mount sma rf connector, sri u1 HMC441LH5 c1 100 pf capacitor, 0402 pkg. c2 1,000 pf capacitor, 0603 pkg. c3 4.7 f capacitor, tantalum pcb [2] 111558 evaluation board [1] reference this number when ordering complete evaluation pcb [2] circuit board material: rogers 4350
|
